On bmmracing.co.uk is this suberb higher end wheel transmitter from Sanwa with many features, for aprox £225
Discover race feeling like the pros! The Sanwa MT-4 is equipped with super fast telemetry and the new 2.4GHz S-Link FH4T system (FH4T = F.H.S.S.-4 telemetry).
Once again, Sanwa is unbeatable compared to its competitors. Super fast response, highest transmission security and rapid telemetry data flow make the Sanwa MT-4 the reference product on the market.
The following telemetry data* are displayed and can be accessed after the run (also as graph):
• RPM – Sensor included
• Temperature – 2 sensors connectable, 1 sensor already included
• Receiver battery voltage (battery charge condition)
Note* The telemetry does only work with the RX-461 receiver
Features:
•Super fast F.H.S.S.-4 technology
•Antenna integrated into the handle
•High-quality case and workmanship
•Menu selection – comfortable operation with scroll wheel
•Telemetry (displays motor temperature, RPM and receiver voltage during operation)
•Telemetry sensors included
•Data logger: up to 120 measuring points during the run (grading selectable)
•Direct Model Select
•Dual Rate, Expo, Trim/Sub Trim, Servo Reverse and Endpoint Adjustment
•Adjustable servo operation speed
•Anti-Lock Braking System
•Programmable model names and 18 model memory
•Compatible with older receivers due to changeable modulation (FH2/FH3/FH4T)
•Adjustable spring tension for steering and throttle
•Changeable throttle mode (5:5 or 3:7)
•Additional grip pad for bigger hands
•Recommended telemetry receiver: RX-461 (1x included)
•Timer
•AUX1 / AUX2
If your looking to make the step up to 2.4Ghz and haven't a big budget in mind then this is a great step onto the ladder for £34 including reciever. its on apexmodels.com
Ansmann Racing W5 2.4GHz steerwheel RC Combo
Features:
• 2-channel steerwheel transmitter
• 3-channel micro receiver
• Crystal and interference free 2.4GHz technology
• Fail Safe Function
• Charge socket (for optional 8xAA rechargeable batteries)
• Flip up cover - To reveal:
◦ Power-On LED
◦ Battery level indicator LED
◦ Steering reverse switch
◦ Throttle reverse switch
◦ Bind button
◦ Steering trim
◦ Throttle trim
◦ Steering Dual Rate
◦ Power On/Off switch
Found a bargain 6v reciever pack on modelsport.co.uk for £12.99.
This is a 1600 NiMH 5 cell reciever pack with universal connector.
This AD/DC universal charger is on apexmodels.com for £54.
The NEW xBase 2.0 provides you with an affordable, computer-controlled universal quick charger which allows you to charge both traditional rechargeable NiCd, NiMH as well as Lead Acid (PB) battery packs.
Now featuring a built in balancer, the NEW Xbase 2.0 is able to safely and accurately charge, discharge and cycle LiPo, LiFe and Li-Ion packs.
Other NEW features include a 5 model memory, USB data PC link for cell analysis and a thermal protection limit.
Supplied with Mains AC power supply to enable charging at home or in the field.
Specification:
• Computerised balance charging system
• Individual voltage balancer for charge and discharge
• Lithium FAST and STORAGE charge modes
• Delta peak sensitivity
• Auto charge current limit
• Capacity limit
• Temperature limit
• Charge time limit
• Input power monitor
• Data store
• Cycle charge/discharge - Perform 1-5 cycles
• PC based analysis using USB communication
• LiPo, LiFe, Li-Ion 1-6 cell
• NiCad, NiMh (SubC) 1-15 cell
• Lead Acid (Pb) 2/20v
• Charge rate 0.1A-5A
• Discharge rate 0.1A-1A
• Input voltage 12DC and 240AC with included power supply
• Special balance adaptor for 1-6 cells
• Large selection of charge leads
• Deans lead
• Glow stick lead
• RX pack BEC lead
• RX pack 3-pin lead
• Crock clips
• Temperature sensor lead
• USB data cable
This Savox aluminium cased servo is on apexmodels.com for £84.99, that's £15 cheaper than most other sites
The new SA1283SG has some great features for those applications that are particularly hard on servos. This standard size servo produces 30kg of force at 6V and has a proven steel gearbox to back up that force. It also features a metal mid and top case that ensures the gear will remain in place under maximum load.
This servo comes equipped with dual ball bearings and an all steel gear train, yet weighs in at only 80 grams.
Suitable for electric/nitro cars and electric aircraft.
Spec Check:
Dimensions: 40.8 x 20.2 x 37.4mm
Weight: 80g
Speed (sec/60°): @4.8v 0.16, @6.4v 0.13
Torque (kg-cm/oz-in): @4.8v 25.0/347.2, @6.0v 30.0/416.6
Gear: Unique Steel
Case: Aluminium
Bearing: 2BB
This 12v starter box battery is on modelsport.co.uk for £19.89
Perfect for use in large starter boxes where high power is required for starting. Also can be used as a charging source, as compact size makes for easy transportation.
12v lead acid battery suitable for most starter boxes.
This is on modelsport.co.uk for £6.79
Mains charger for 12 Volt Lead Acid battery as used in starter boxes for nitro cars.
Input - 240v mains supply
Output - 12v 500mah
You are viewing the text version of this site.
To view the full version please install the Adobe Flash Player and ensure your web browser has JavaScript enabled.
Need help? check the requirements page.